 |
 |
 |
|
 |
 |
 |
|
 |
|
 |
 |
 |
 |
|
 |
|
 |
|
 |
VCR Commander
Now you can set your XCam2 and VCR on auto-pilot to "Record ONLY the action" in and around your home totally hands free! It's the NEW X10 VCR Commander Kit. Whether you're home or not, when motion is detected, this amazing product can turn on the appropriate X10 Camera and your VCR - then automatically send a "Record" command to your VCR!VCR Commander also works with multiple camera systems. If a person starts walking around your house, as they enter Zone 1 the camera monitoring Zone 1 will turn on, and the VCR Commander starts your VCR recording. As they enter Zone 2, the second camera will turn on (camera 1 will turn off) and the VCR will continue to record what's happening in Zone 2. As the person completes a trip around your home (ex. visiting Zones 1-4), the tape will show everything as they move between all four zones.
When no motion has been detected from the motion detector linked to the VCR Commander for 5 minutes, the VCR Commander will turn the VCR OFF or STOP recording. This will make sure your tape only shows the action and reduces the amount of blank, no action time.
Imagine going on a 2 week vacation with the family. When you get home, turn on the VCR and watch everything that happened around your home while you were away. Someone try to visit you? Someone try to break in? Who smashed the mailbox? It's all on tape!
|
Product Shot with Logo
|
Product Logo
|
Product Logo
|
X10 Brand Logo
|
These images are copyrighted by X10 WTI. Use of these images is
limited.
Press use for the purpose of promotion, reporting, reviews, biography, and story background is acknowledged.
A signed release must be on file at X10 WTI for any other use, commercial or private. X10 reserves the right to protect its Copyrights, Registrations Marks, Trade Marks, and Service Marks.
